Connecting The Inputs - SoundCraft D-Mix 500 User Manual

Connecting The Inputs - Examples
Example 1
In this example, 2 CD players are connected: one each to channels 1 and 7. There is also a turntable connected to channel
5. The DJ's mic would normally be plugged into mic 1 (channel 3) via the front panel, and is therefore not shown in this
diagram; an additional mic shown is connected to mic 2 (channel 4). This may be used by, for example the MC. Finally
there is an Effects unit and a limiter/compressor connected to the FX insert point: these would be used by the mic channels.
Example 2
In this example, 2 turntables are connected: one each to to channels 2 and 6. There is also a CD player connected to channel
5. The DJ's mic would normally be plugged into mic 1 (channel 3) via the front panel, and is therefore not shown in this
diagram. Other options may include a Cassette Deck connected to channel 7, and a Video Disk Player connected to channel
1, for example.
2.6 D-MIX500 Installation