Page 4
Clipped Signal Noise If the signal level is too high, clipping distortion may occur. Signal Noise If the signal level is too low it may be masked by the noise.
Page 7
Balanced Mic 2. Hot(+ve) 3. Cold(-ve) 1. Screen Unbalanced Mic 2. Hot(+ve) Link 3 to 1 1. Screen Balanced Unbalanced 3 pole Jack 3 pole Jack Hot (+ve) Signal Cold (-ve) Gnd/Screen Gnd/Screen Gnd/Screen Ring Sleeve Inserts Signal Send Signal Return Gnd/Screen Ring Sleeve...
Page 8
Insert Point Aux Outputs Screen Signal Return Rec Outputs Direct Outputs Return from External Device Signal + Signal - Screen From SPIRIT 8 (a) Balanced Connection Impedance Balanced Signal To External Device Headphones Output Left Signal Right Signal Screen Signal Ground...
Page 10
+28dBu max. +22dBu max. +6dBu +4dBu +4dBu -100 -110 -120 Mic input EIN -129.5 (150 ohm source) -130...
Page 25
SCENE 2 OR BAND 2 SCENE 1 OR SOURCES BAND 1 SOURCES RELEASE TO HEAR SCENE 1/ BAND1 RELEASE ASSIGN ASSIGN TO HEAR SCENE 2/ MUTE 1 MUTE 2 BAND2...
Page 26
Slave Mixer MONO STEREO GROUP MASTER Groups 1-8 out Mix L/R out Master MIxer MONO STEREO GROUP MASTER NOTE: PFL/AFL and Group Muting are SEPARATE for each mixer...