Accessories - McGREGOR MCH1851 Original Instruction Manual

Technical data
Noise technical date
A weighted sound pressure
K =3 dB (A)
pA
A weighted sound power
Wear ear protection.
VIBRATION INFORMATION
Typical weighted vibration a
WARNING:
declared value depending on the ways in which the tool is used dependant on the following examples and
other variations on how the tool is used:
How the tool is used and the materials is cut or drilled.
The tool being in good condition and well maintained
To use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed
WARNING:
should also take account of all parts of the operating cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the job. This may significantly reduce the exposure level
over the total working period.
Help to minimize your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades
Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate)
If the tool is to be used regularly then invest in anti vibration accessories.
Plan your work schedule to spread any high vibration tool use across a number of days.

Accessories

Safety guard (installed on machine )
Blade sheath (installed on machine)
Charger
Battery pack
20
= 2.207m/s , uncertainty K= 1.5m/s
2
h
The vibration emission value during actual use of the power tool can differ from the
To be accurate, an estimation of exposure level in the actual conditions of use
Customer helpline 0345 605 2065
2
MCH1851 MCH1845
1
1
1
1
L = 65.7dB(A)
pA
L = 79.8dB(A)
wA
1
1
1
1