Accessories; Environmental Protection - McGREGOR MET3525 Original Instruction Manual

Accessories

Safety guard
Flower guard
We recommend that you purchase your accessories from the same store that sold you the tool. Choose
the type according to the work you intend to undertake. Refer to the accessory packaging for further
details. Store personnel can assist you and offer advice.
Troubleshooting
General troubleshooting
The following chart lists problem symptoms, possible causes and corrective action, if your electric
grass trimmer does not operate properly. If these do not identify and correct the problem, contact
your service agent.
WARNING! Always switch the product off, disconnect it from power supply and let the
product cool down before performing inspection, maintenance and cleaning work!
Problem
Grass trimmer does
not operate
Grass trimmer
operates
intermittently
Grass trimmer
labours
Grass trimmer is not
cutting
Line can't be fed
Line keeps breaking 6.1 Line inside the spool

Environmental protection

This product has been marked with a symbol relating to removing electric and electronic waste. This
means that this product shall not be discarded with household waste but that it shall be returned to
a collection system which conforms to the European Directive 2002/96/CE. It will then be recycled
or dismantled in order to reduce the impact on the environment. Electric and electronic equipment can be
hazardous for the environment and for human health since they contain hazardous substances.
18
Possible cause
1.1 No power
1.2 Mains socket faulty
1.3 Extension cord damaged
1.4 Fuse faulty
2.1 Extension cord damaged
2.2 Internal wiring damaged
3. Grass too high
4 Line too short/broken off
5.1 Spool empty
5.2 Line inside the spool
entangled
entangled
6.2 Trimmer used incorrectly
Customer helpline 0345 605 2065
MET3525 MET4530
Solution
1.1 Check power
1.2 Check other socket, replace
1.3 Check cord, replace
1.4 Replace fuse
2.1 Check cord, replace
2.2 Contact Service Agent
3. Cut in stages
4 Feed the line manually/automatically
5.1 Replace the spool
5.2 Inspect the spool, rewind if necessary
6.1 Inspect the spool, rewind if necessary
6.2 Only trim with the tip of the line, avoid
stones, walls and other hard objects.
Feed the line regularly to maintain full
cutting width.
MET6032
1
1