Assemble; Prepare - McGREGOR MCH1851 Original Instruction Manual

18v cordless hedge trimmer
Table of Contents

Advertisement

Assemble

Assembling instructions
The hedge trimmer has been already assembled, You needn't to assemble.

Prepare

Preparing instructions
Always take care when removing the packaging to prevent damage to you or to the hedge trimmer.
IMPORTANT! Before assembling the hedge trimmer, check all the parts indicated in the manual
are in the box. Inspect all the parts for signs of damage. Do not assemble the hedge trimmer if you
observe any damaged components.
NOTE: Before using the tool, read the instruction book carefully.
Remove all parts of the hedge trimmer from the box and carefully remove all packaging. Take care
not to lose any instructions which may be attached to the tool, these provide important information
which will be required while assembling the hedge trimmer.
1. TO CHARGE THE BATTERY (See Fig. A)
Chargers and batteries are specifically designed to work together. Do not attempt to use batteries
with any other charger than that specified in these instructions.
Important notes for charging the battery:
In a warm environment or after heavy use, the battery pack may become too hot to permit
charging. Allow time for the battery to cool down before recharging.
BEFORE USING YOUR CORDLESS HEDGE TRIMMER, YOU MUST FULLY CHARGE THE BAT-
TERY
Your battery pack is UNCHARGED and you must fully charge before use.
HOW TO CHARGE THE BATTERY:
A discharged battery at normal ambient temperature will take approximately 3-5 hours to reach full
charge.
WARNING:
sunlight or heat, allow time for the battery pack to cool down before re-charging to achieve the full
charge.
CHARGING INDICATOR
Light
Red on
Green on
When battery charge runs out after continuously use or exposure to direct
Status
Charging
Fully Charged
Customer helpline 0345 605 2065
A
15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mch1845

Table of Contents