McGREGOR MCH1851 Original Instruction Manual page 16

Prepare
Preparing instructions
2. TO REMOVE OR INSTALL BATTERY PACK (See B1, B2)
Depress the Battery pack release button to release battery pack from your hedge trimmer. After
recharging, insert the battery pack into hedge trimmer's battery port. A simple push and slight
pressure will be sufficient.
WARNING!
B1
3. BEFORE STARTING YOUR HEDGE TRIMMER
Remove blade sheath as illustrated in Fig C.
C
4. TO START YOUR HEDGE TRIMMER (See D)
Your trimmer is equipped with two switch levers ,safety switch and On/Off switch. Both switch levers
need to be pressed for the hedge trimmer to start. Depress and hold safety handle switch on front
handle and press on/off switch on rear handle.
D
Front(Safety switch)
TO STOP YOUR HEDGE TRIMMER
Move hedge trimmer away from cutting area before stopping.
To stop, release either the safety handle switch or On/Off switch, the Trimmer will stop almost immediately.
WARNING:
until all damaged parts have been replaced or repaired. Failure to do so could result in serious personal injury.
16
DO NOT USE THE PRODUCT WITHOUT ATTACHING THE GUARD.
Rear(On/Off switch)
If any parts are missing, damaged or broken, do not operate your hedge trimmer
Customer helpline 0345 605 2065
B2