Canovate Can BREEZE Series Operating And Maintenance Instructions Manual page 44

DSW3: Capacity
Factory setting
8 kW
ON
1 2 3 4 5 6
8 kW
ON
1 2 3 4 5 6
DSW5: Transmission Setting of End Terminal
Resistance
Factory setting
Cancellation
In the case that the outdoor units quantity in the same
H-LINK is 2 or more, set No. 1 pin of DSW5 at "OFF"
side from the 2nd refrigerant group outdoor unit. If
only one outdoor unit is used, no setting is required.
Refrigerant Cycle No. Setting
DSW6: Optional function setting (IVX series only)
For individual operation
(factory setting position)
For IVX series
For simultaneous operation
DSW4
Factory setting
(Setting for the ten digit).
DSW6: Not available for ES series
Factory setting
RSW1
44 l Can BREEZE Operating and Maintenance Cooling Unit Instructions 8-14 kW www.canovate.com
14 kW
ON
1 2 3 4 5 6
14 kW
ON
1 2 3 4 5 6
or
l info@canovate.com l P. +90 216 484 2222