Maintenance; Take Out The Filter - Canovate Can BREEZE Series Operating And Maintenance Instructions Manual

DSW7: Fuse Recover
In case of applying high voltage to the terminal
1,2 of TB1, the fuse on the PCB1(M) is cut. In
such a case, firstly correct the wiring to TB1 and
then turn ON #1 (as showing beside)
DSW7: Remote Control Selection
No setting is required. Setting position before
shipment is all OFF (PC-ART) Remote Control
Switch Selected).
NOTE:
- The mark "■" indicates position of dips switches.
Figures show setting before shipment or after
selection.

10. MAINTENANCE

Do not operate the system without the air fi lter to
protect the indoor unit heat exchanger against being
clogged. Turn OFF the main power switch before
taking out the fi lter. (The previous operation mode
may appear.)
The indication, "FILTER" is shown on the display
of the remote control switch. Take out the air fi lter
according to the indicated steps for each unit.
10.1

TAKE OUT THE FILTER

Ceiling Type
1. Side the knobs.
Knob
2. Open the air inlet grille.
3. Take out the air fi lter from the air inlet grille.
www.canovate.com l info@canovate.com
ON
1 2
ON
1 2
l P. +90 216 484 2222 Can BREEZE Operating and Maintenance Cooling Unit Instructions 8-14 kW l 19