Body & Accessories
Keyless Control Module
•
The Keyless Control Module is located behind the glove box. It confirms the identification
of the card keys and transmits this information via the CAN bus to the PJB (for keyless
entry) and to the PCM (for keyless start).
NOTE: When replacing the keyless control module, the new module has to be configured.
To do this connect M-MDS to the vehicle and select the option Toolbox→Module
Programming→Programmable Module Installation→RKE.
1
View from rear of the glove box
2
Nut
Service Training Mazda3 F/L
Security and Locks
3
Keyless control module
4
Connectors
M3FL_09005
09-9