Synology Diskstation At A Glance - Synology DiskStation DS2419+ Hardware Installation Manual

Synology DiskStation at a Glance

No. Article Name
1 Status Indicator
2 Alert Indicator
3 Power Button
4 LAN Indicator
5 Drive Status Indicator
6 Drive Tray
7 Drive Tray Lock
8 Power Port
9 Fan
PCI Express
10
Expansion Slot
11 USB 3.0 Port
12
RESET Button
13 Console Port
14 Expansion Port
15
LAN Port
1
For more information about Synology Expansion Unit supported by your DiskStation, please visit www.synology.com.
4 Chapter 1: Before You Start
Location
Displays the status of the system. For more information, see "Appendix B:
LED Indicator Table".
Displays warnings regarding fan or temperature. For more information, see
"Appendix B: LED Indicator Table".
1. Press to power on the DiskStation.
2. To power off the DiskStation, press and hold until you hear a beep sound
and the Power LED starts blinking.
Displays the status of the network connection. For more information, see
Front Panel
"Appendix B: LED Indicator Table".
Displays the status of the installed drive. For more information, see "Appendix
B: LED Indicator Table".
Install drives (hard disk drives or solid state drives) here.
Lock or unlock drive trays.
Connect the AC power cord here.
Disposes of excess heat and cools the system. If the fan malfunctions, the
DiskStation will emit a beeping sound.
Supports one PCIe x8 slot (x4 link) add-on card.
Connect external drives or other USB devices to the DiskStation here.
1. Press and hold until you hear a beep sound to restore the default IP
Back Panel
address, DNS server, and password for the admin account.
2. Press and hold until you hear a beep sound, then press and hold again
until you hear three beep sounds to return the DiskStation to "Not Installed"
status so that DiskStation Manager (DSM) can be reinstalled.
This port is used for manufacturing use only.
Connect Synology Expansion Unit
Connect network cables here.
Description
1
to the DiskStation here.