Synology DiskStation DS2419+ Hardware Installation Manual page 7

3 Load drives in the drive trays.
• For 3.5" drives: Remove the fastening panels from the sides of the drive tray. Place the drive in the drive
tray. Then insert the fastening panels to secure the drive in place.
• For 2.5" drives: Remove the fastening panels from the sides of the drive tray and store them in a safe
place. Place the drive in the blue area (shown below) of the drive tray. Turn the tray upside down and tighten
the screws to secure the drive in place.
4 Insert the loaded drive tray into the empty drive bay.
Make sure the tray is pushed in all the way. Otherwise, the drive might not be able to function properly.
Note:
5 Press the handle in flush with the front panel to hold the drive tray in place.
7 Chapter 2: Hardware Setup