Jeep Grand Cherokee 2013 Operating Information Manual page 43

Resetting Active Head Restraints (AHR)
If the Active Head Restraints are triggered in a
collision, you must reset the head restraint on
the driver's and front passenger seat. You can
recognize when the Active Head Restraint has
been triggered by the fact that they have moved
forward (as shown in step three of the resetting
procedure).
1. Grasp the deployed AHR from the rear seat.
Hand Positioning Points On AHR
2. Position the hands on the top of the de-
ployed AHR at a comfortable position.
3. Pull down then rearward towards the rear of
the vehicle then down to engage the locking
mechanism.
1 — Downward Movement
2 — Rearward Movement
3 — Final Downward Movement To Engage Lock-
ing Mechanism
4. The AHR front soft foam and trim half should
lock into the back decorative plastic half.
39