Jeep Grand Cherokee 2013 Operating Information Manual page 301

1. Remove the spare tire, jack, and tools from
storage.
2. Loosen (but do not remove) the wheel lug
nuts by turning them to the left, one turn, while
the wheel is still on the ground.
3. Assemble the jack and jacking tools.
Jack and Tool Assembly
CAUTION!
Do not attempt to raise vehicle by jacking on
locations other than those indicated in the
Jacking Instructions for this vehicle.
Jacking Locations
4. For the front axle, place the jack on the body
flange just behind the front tire as indicated by
the triangular lift point symbol on the sill mold-
ing. Do not raise the vehicle until you are
sure the jack is fully engaged.
Lift Point Symbol On Sill Molding
Front Jacking Location
297