Instruction manual
Instruction manual
Degaussing instructions
1.
Press the power button (7)
2.
The following items are displayed in sequence (1):
•
splash screen with device name,
•
information on the required technical survey (if the service counter
reaches value defined by the device's manufacturer),
•
information on the remaining number of cycles (if the allowed cycle
counter is set),
•
information on the number of completed cycles (since the last resetting
of cycle counter),
•
depending on the location of the drawer, information on the further
steps will be displayed.
NOTE Messages shown on LCD (1) are in English but they are also available
in different languages. Contact manufacturer or distributor to change the
language.
NOTE Communication with PC is possible only at this time. After changing
the position of the drawer the communication with PC is locked.
12
YOU MUST DISCONNECT THE CONNECTING CABLE
BETWEEN THE DEVICE AND COMPUTER AND PLACE
COMPUTER AT LEAST 1 M FROM DEGAUSSER
BEFORE STARTING THE DEGAUSSING OF STORAGE
MEDIA.
LEAVING THE CONNECTED CABLE MAY DAMAGE
THE COMPUTER.
www.prodevice.eu
ASM120