Installation And Use - ProDevice ASM 120 Instruction Manual

Installation and use

Requirements for power supply
Check power supply parameters for the device on the rating plate located on
the rear panel of degausser. Use only the original power cable supplied with
ASM120.
Location of the device during operation
Place the degausser on a flat, stable surface. Forced cooling air flow is used
to maintain optimum air temperature inside the degausser. Keep 20 cm
distance from any objects to ensure optimum operation of cooling system
located at the back of the device. All devices (in particular data media not
intended for degaussing) should be located at least 1 m from degausser.
The main power switch activates and initializes the operation of the
device and activates cooling system.
ASM120
IT IS PROHIBITED TO OPEN DEVICE HOUSING. ANY
SERVICE ACTIVITIES SHOULD BE PERFORMED
ONLY BY QUALIFIED PERSONNEL WITH APPLICABLE
QUALIFICATIONS. REMOVING THE HOUSING
CAUSES RISK OF ELECTRIC SHOCK AND/OR DEATH!
www.prodevice.eu
Instruction manual
Instruction manual
11