Appendix; After-Sales Service; Spare Parts - Samson 44-7 Mounting And Operating Instructions

Appendix

10 Appendix

10.1 After-sales service

Contact SAMSON's After-sales Service de-
partment for support concerning service or
repair work or when malfunctions or defects
arise.
E-mail address
You can reach the After-sales Service De-
partment at aftersalesservice@samson.de.
Addresses of SAMSON AG and its subsid-
iaries
The addresses of SAMSON, its subsidiaries,
representatives and service facilities world-
wide can be found on our website
(u www.samson.de) or in all SAMSON
product catalogs.
To assist diagnosis and in case of an unclear
mounting situation, specify the following de-
tails (so far as possible). See section 2:
− Device type and nominal size
− Model number and configuration ID
− Upstream and downstream pressure
− Temperature and process medium
− Min. and max. flow rate
− Is a strainer installed?
− Installation drawing showing the exact
location of the regulator and all the ad-
ditionally installed components (shut-off
valves, pressure gauge etc.)
34

10.2 Spare parts

Position numbers
2 Plug
4 Coupling nut
7 Restriction assembly
26 Stopper
28 Screw plug
30 Body
31 Threaded seat
53 Nut
56 Nut
57 Nut
58 Lock nut
70...78 Compression spring
83 Diaphragm stem
90 Diaphragm plate
95 Spring plate
105 Washer
112 Diaphragm case assembly
116 Pipe
124 Diaphragm
130 Screw
150 Axial needle bearing
155 Screw fitting
186 O-ring
215 O-ring
226 Nut
234 O-ring
EB 2723 EN