Table of Contents
Advertisement
■ Help of the TRGINH Setting
[Command] trginh - -help
[Process]
Displays the help of the TRGINH
Setting command.
Camera DMAINH Setting
■ DMAINH Setting
[Command] dmainh VALUE
[Parameter] VALUE: on, off
on: Prohibits the camera block from
transferring the image signal.
off: Allows transfer of the image
signals
[Process]
Switches between prohibiting and
allowing of transfer of the image
signals from the camera block to the
CPU block.
<Example> Prohibiting transfer of the image
signal
dmainh on<CR>
camera dmainh complete<CR>
■ Current DMAINH Setting
[Command] dmainh
[Process]
Displays the current dmainh setting.
■ Help of the DMAINH Setting
[Command] dmainh - -help
[Process]
Displays the help of the DMAINH
Setting command.
Camera STROBE Setting (XCI-V3 only)
■ STROBE Setting
[Command] strobe DELAY
[Parameter] DELAY: -67 to +60 (µs) (1 step)
[Process]
Sets the strobe delay.
<Example> Setting the strobe delay to -10µs
strobe -10<CR>
camera strobe delay complete<CR>
■ Current STROBE Setting
[Command] strobe
[Process]
Displays the current strobe setting.
■ Help of the STROBE Setting
[Command] strobe - -help
[Process]
Displays the help of the STROBE
Setting command.
External Control Commands
Camera FILTER Setting (XCI-V3 only)
■ FILTER Setting
[Command] filter FILTER
[Parameter] FILTER: off, lut, filter1 or filter2
off: Invalidates the 3 x 3 filter.
lut: The 3 x 3 filter becomes valid.
The circuit operation functions in
order of LUT and the 3 x 3 filter.
filter1 or filter2: The 3 x 3 filter
becomes valid. The circuit operation
functions in order of the 3 x 3 filter
and LUT.
[Process]
Sets the validation, invalidation, and
order of the 3 x 3 filter.
<Example> Validating the 3 x 3 filter and the
circuit operation functions in order of
the 3 x 3 filter and LUT.
filter filter1<CR>
camera filter function complete<CR>
■ Current FILTER Setting
[Command] filter
[Process]
Displays the current filter setting.
■ Help of the FILTER Setting
[Command] filter - -help
[Process]
Displays the help of the FILTER
Setting command.
Camera MATRIX Setting (XCI-V3 only)
■ MATRIX Setting
[Command] matrix A11 A12 A13 A21 A22 A23
A31 A32 A33
[Parameter] Axx: -31.9688 to 31.9688 (1/32 of a
step)
[Process]
Sets the 9 matrix coefficients of the 3 x
3 filter.
A11 A12 A13
A21 A22 A23
A31 A32 A33
<Example> Setting the filter matrix to -1 -1 -1 -1 8
-1 -1 -1 -1
matrix -1 -1 -1 -1 8 -1 -1 -1 -1<CR>
camera filter matrix function
complete<CR>
■ Current MATRIX Setting
[Command] matrix
[Process]
Displays the current matrix setting.
■ Help of the MATRIX Setting
[Command] matrix - -help
[Process]
Displays the help of the MATRIX
Setting command.
32
Advertisement
Table of Contents
