Table of Contents
Advertisement
FIGURE 7
Ceramic tile ripper attachment.
This attachment is designed for light to medium duty
projects requiring the removal of ceramic, thicker VCT
and linoleum tiles, hardwood floors, etc, from concrete
and wood surfaces. FIGURE 8.
FIGURE 8
The primary design function for the BON
FLOOR STRIPPER is not to remove ceramic
tile. Removing ceramic tile is a secondary
job application that may require the use of a
machine and/or process with significant
greater stability, power and/or impact force.
The Bon Floor Stripper has demonstrated the
ability to remove ceramic tile for those job
applications classified as light to medium
duty. An improper job application for the
Bon Floor Stripper may result in property
damage and/or personal injury.
INSTALLING A BLADE OR THE CERAMIC TILE
RIPPER ATTACHMENT TO THE BON FLOOR
STRIPPER.
Tools required: 1 each, 5/32 inch T-handled Allen
wrench provided with the machine.
Parts required: 1 each, blade appropriate for the job
application or the ceramic tile ripper
attachment.
WHEN INSTALLING OR REMOVING A BLADE
O R T H E C E R A M I C T I L E R I P P E R
AT TA C H M E N T TO / F R O M T H E B O N F L O O R
S T R I P P E R A L W AY S W E A R T H E
A P P R O P R I AT E S A F E T Y E Y E W E A R ,
G L O V E S , L E AT H E R S H O E S A N D L O N G
PA N T S T O M A X I M I Z E P E R S O N A L
PROTECTION FROM THE SHARP EDGE(S).
IMPROPER CONTACT WITH A SHARP EDGE
C A N R E S U LT I N P R O P E R T Y D A M A G E
AND/OR PERSONAL INJURY.
1) Properly disconnect the extension cord or the Bon
Floor Stripper from the power source.
2) To place the operator handle in the work position,
move the handle upright so that the ball-detent pins
can be inserted through the operator handle and main
frame. Determine the ball-detent pins are inserted
through the operator handle and main frame to fully
expose the ball detent. FIGURE 9.
FIGURE 9
4430 Gibsonia Rd. • Gibsonia, PA 15044 • USA • www.bontool.com
13
Advertisement
Table of Contents
