Table of Contents
Advertisement
3) Adequate force exerted against the Bon Floor
Stripper by the operator that pushes the blade or
accessory attachment against the covering material to
deliver acceptable productivity rates.
4) Since no two covering materials are exactly alike,
no two covering materials can be removed by the
exact same method. The nature of the covering
removal process, along with operator experience, skill
and common sense, would suggest that efficient and
productive material removal is a matter of trial and
error.
Combinations of blade or accessory attachment type,
job site conditions, and feed rates are direct factors
that will also determine the overall success of the job
application.
BLADE CONFIGURATIONS, ACCESSORY
ATTACHMENTS AND APPLICATIONS.
Bon Floor Stripper blades are fabricated from high
carbon steel, precision machined and heat treated for
extended service life. Blades are marked to depict
use on either concrete or wood surfaces. When uti-
lized on concrete, the cutting edge is positioned fac-
ing up.
FIGURE 3. On wood flooring surfaces, the cutting
edge faces down against the surface.
FIGURE 4. This configuration allows the blade to
skim over the surface and minimize any tendency to
gouge or dig into the wood. A slotted blade configura-
tion is employed to lower installation and removal
time. The slotted configuration is also intended to
help minimize direct exposure of hands, arms and
other body parts to the blade during the installation or
removal process.
FIGURE 3
FIGURE 4
A protective covering is provided to protect the blade
cutting edge from external damage and minimize the
potential for property damage and/or personal injury.
Store the blade with the protective covering
properly installed to minimize the effects of
external damage to the cutting edge and the
potential for property damage and/or
personal injury.
THE BLADE IS EXTREMELY SHARP.
IMPROPER HANDLING WHILE REMOVING
F R O M T H E P A C K A G E ,
R E M O V I N G / R E I N S T A L L I N G T H E
PROTECTIVE CUTTING EDGE COVER,
I N S TA L L I N G / R E M O V I N G F R O M T H E
M A C H I N E O R W H I L E I M P R O P E R LY
T R A N S P O R T I N G C A N R E S U LT I N
PROPERTY DAMAGE AND/OR PERSONAL
INJURY.
While individual blade or accessory attachment
design and configuration may vary, basic operational
characteristics are identical: impact against a floor
surface and remove the covering material. This
common operational characteristic has led to the
development of the following popular blade
configurations and accessory attachments:
4430 Gibsonia Rd. • Gibsonia, PA 15044 • USA • www.bontool.com
11
Advertisement
Table of Contents
