Water temperature controls groups of fixtures - thermostatic (24 pages)
Summary of Contents for Armstrong FTV
Page 1
FILE NO: 35.815IN DATE: Aug. 25, 2011 SUPERSEDES: New DATE: INSTALLATION AND OPERATING INSTRUCTIONS Armstrong Model FTV 350mm to 600mm Flo-Trex Valve TABLE OF CONTENTS Section Page 1.0 - Introduction.............................2 1.1 - Warning ..............................2 2.0 - Installation ..............................3 3.0 - Storage ..............................3 4.0 - Cleaning ..............................3...
Page 2
1.0 - INTRODUCTION The Armstrong Model FTV Flo-Trex Combination Valves are designed for installation on the discharge side of centrifugal pumps. The Armstrong Combination Valve incorporates three functions in one valve: • Drip-tight shut-off valve • Spring-closure design, non-slam check valve •...
Page 3
It is not recommended to mount a valve directly to the pump as this could cause undesirable noise in the system. Sufficient clearance around the valve should be left for valve removal or repair. Install valve in the direction of the flow arrows on the valve body. The valve body has been designed to handle the weight of the pump on vertical in-line installations.