DURKOPP ADLER 867 Additional Instructions page 17

Assembling the remaining thread monitor
Efka control (class 867 only)
Recommended mode for remaining thread monitor function:
Parameter F-195 on value "3"
Parameter
F-195
F-195
F-195
F-195
F-195
F-195
085
F-195
085
086
086
Information
A detailed functional description of the remaining thread monitor functions
and the stitch counts can be found in the instructions for use of the DA82GA
or DA321G controls.
Additional Instructions 867/867-M PREMIUM - 00.0 - 07/2018
Value Function
0 Remaining thread monitor off
1 No stop after 1st detection Bobbin empty,
after thread cutting, sewing foot down
2 With stop after 1st detection Bobbin empty,
after thread cutting, sewing foot up
3 With stop after 1st detection Bobbin empty,
after thread cutting, sewing foot down
4 Hook thread monitoring via preset number
of stitches
Light barrier remaining thread monitor control
without function
1 - 3
0 - 9990 Number of stitches for remaining thread
Count from 1st detection Bobbin empty
until stop
4
0 - 9990 Number of stitches A for hook thread
monitoring
Pre-set number of stitches is counted
downwards to "0". When the value "0" is
reached: Stop at value 0 and after thread
cutting sewing foot down.
0 - 9990 Number of stitches B for hook thread
monitoring
Pre-set number of stitches is counted
downwards to "0". When the value "0" is
reached: Stop at value 0 and after thread
cutting sewing foot down.
0 - 9990 Number of stitches C for hook thread
monitoring
Pre-set number of stitches is counted
downwards to "0". When the value "0" is
reached: Stop at value 0 and after thread
cutting sewing foot down.
15