Advertisement
TEST MODE
To avoid risk of electrical shock, personal injury or death; disconnect power to dryer before
servicing, unless testing requires power.
Software Version Display Mode
Definition of Software Version Display Mode:
1.
This mode is third mode of Special Test Mode.
2.
Dryer will display software version.
How to Enter:
1.
To enter Special Test Mode press While in Service Mode pressing the 'Temp" key until the
control beep.
example) In case of "U105", "U1" means major version, "05" means minor version.
Temperature Display Mode(in Celsius)
Definition of Temperature Display Mode:
Dryer will display temperature of drum inside in Celsius.(Unit is0.1°C)
How to Enter:
1.
Under Normal User Mode, Press "More Time" and "Less Time" keys simultaneously for 7
seconds.
2.
This action will put the dryer into Touch Sensor Mode.
3.
Under Touch Sensor Mode, Press "More Time" Key.
• Converting °C -» °F
Celsius(°C)
Fahrenheit(°F)
Celsius(°C)
Fahrenheit(°F)
System Check Mode
How to Enter:
Dryer Status for test
Power Off State
(Normal User Mode)
System Check Mode:
1.
While in Power Off, pressing the 'Temp" + "Power" keys simultaneously will put the dryer into
the System Check Mode.
.
2
" t2" will display.
3.
System Check Mode Progress t2 mode Function Performed Start/Pause
Motor(CW) Relay On -* Heater Relay On -» Heater Relay Off -* Motor(CW) Relay Off (Circulation)
A
0.00
10.00
20.00
32.00
50.00
68.00
80.00
90.00
100.00
176.00
194.00
212.00
Buttons to press to enter test
Temp + Power Key
WARNING
30.00
40.00
86.00
104.00
110.00
120.00
230.00
248.00
4
50.00
60.00
70.00
122.00
140.00
158.00
Test Mode
System Check Mode
Advertisement
