Finishing The Work - NT-MDT NTEGRA Spectra Instruction Manual

4.5. Finishing the Work

1. Open the feedback loop by releasing the
2. Retract the sample from the probe as follows:
Approach
a. Go to the
panel.
b. Double-click in the
Control panel of the
of 2÷3 mm.
c. To retract the sample from the probe, click the
group (Fig. 4-21).
3. Switch off the laser.
4. Switch off the SPM controllers.
5. Switch off the spectrometer.
6. Close the Control program.
tab with the
Moving
input field of the
Approach
tab to open a slider. Position the slider at the value
Fig. 4-20
Fig. 4-21
Chapter 4. Performing Measurements
button.
button in the Main Operations
Backward
group (Fig. 4-20) on the
button of the
Backward
51