Cleaning & Maintenance - ACR Electronics Wychwood WYC1GAS User, Installation & Servicing Instructions

Balanced flue gas stove
Table of Contents

Advertisement

Cleaning & Maintenance
Never attempt any cleaning or maintenance of the
appliance unless the appliance is cold
This appliance should be inspected and serviced once a year by a qualified, competent and
registered person.
The inspection and maintenance must at least ensure that the appliance is working correctly
and safely.
It is advisable to clean the exterior of the appliance of any dust and debris regularly during
the heating season and especially if the appliance has not been used for some time.
This can be done with a soft brush and a vacuum cleaner or a damp cloth and if required a
non-abrasive cleaning agent.
Do not use corrosive or abrasive substances to clean the exterior of the appliance as this
may damage the painted finish of the stove.
This appliance uses 4 x AA batteries for the ignition and control of the stove.
To access to these batteries, reach under the appliance and remove the control unit located
to the rear right hand side of the appliance, remove the top cover and replace the existing
batteries.
Never use a metal tool to remove the batteries as this may damage the control unit.
Once the batteries have been replaced always refit the control box cover.
7

Advertisement

Table of Contents
loading

Table of Contents