Table of Contents
Advertisement
Burner installation
Before connecting the burner please ensure that the gas supply pipework is in the correct
position for connection to the unit, please ensure that the gas supply pipework is purged
and free from debris.
1. To access the combustion chamber please loosen the two retaining bolts located in
the side of the openable door.
2. Remove the log guard and lift out the perforated grate from the combustion
chamber.
3. Unpack the complete burner and insert the
burner into the combustion chamber. Secure the
burner to the base of the appliance using the 4
bolts provided ensuring that the seal is fully com-
pressed on all sides. Please pay careful attention
to make sure that the attached control box and
associated wiring are not trapped between the
bottom of the burner and the combustion cham-
ber. Ensure that the flexible gas supply pipe is not
damaged in any way and that it's protruding from
the rear, underside of the appliance.
12
Advertisement
Table of Contents
