Screw Adjustment; Operation - UNIA TERIS XL H Series Operating And Maintenance Manual

OPERATING AND MAINTENANCE MANUAL TERIS XLH / TERIS XXLH

3.5.2.2 Screw Adjustment

Fig. 9. Screw adjustment of the mechanically-adjustable skid
Screw adjustment is done with spindles [A] (6 pc.- XL: 10 pc.- XXL.)
Before adjustment, release the bolt [C], and replace it in its place after adjusting the spindle. To
adjust the skid, rotate the spindle [B] clockwise or anti-clockwise in order to lift or lower it.

4. Operation

Always operate the machine in the forward direction (do not reverse with the machine operating
components lowered.)
Set the machine to work on the working rollers, parallel to the ground. Machine rollers must be
evenly loaded.
It is possible to operate the machine equipped with hydraulic drag inoperative (i.e. with the rollers
only); for this purpose, set the drag to its maximum height by means of the hydraulic system, see
[A] in Fig. 8.
Operating a roller equipped with a mechanically-adjustable skid inoperative (i.e. with the rollers
only) can be troublesome due to its adjustment, and therefore, it should be dismantled.
Secure or dismantle the lighting system during operation of the machine
.
- 18 -