Table of Contents
Advertisement
Mode Change Slider
There is a unique slider located on the back of the transmitter that allows for simple mode changes. The slider can also be used to
change each mode into a "quadcopter mode." This mode snaps both sticks to the center position.
Mode 2, 4
Safety Plug
The safety plug is installed in the transmitter to ensure the mode switch
cannot be accidentally moved when in the normal throttle mode (non-
centered) positions.
To remove the plug:
1. Grasp the plug by the raised rib and pull straight out.
Tip: Use a small screw driver to gently pry the plug out.
2. Once the mode has been changed, reinstall the safety plug.
Mode 2, 4
Mode 2, 4
Quadcopter
Simply open the protective slider door and move the slider to the desired
position. All changes happen automatically
If you are changing modes you must fi rst center the sticks.
Mode 2, 4
Quadcopter
Mode 1, 3
Mode 1, 3
Quadcopter
inside the transmitter.
5
Mode Slider
Slider Door
EN
Hide quick links:
Advertisement
Table of Contents
