Physical Transmitter Adjustments; Ratcheted Throttle - Smooth Throttle Adjustment; Adjust Stick Tension; Control Stick Length Adjustment - Spektrum InterLink SPMRFTX1 Instruction Manual

Dx simulator controller
Table of Contents

Advertisement

Physical Transmitter Adjustments

The InterLink DX controller has all the physical transmitter
adjustments located around the gimbal face of each gimbal. This
arrangement allows for quick and easy adjustments with out taking
the back cover off or removing any plugs to access adjustment
screws.
Available adjustments:
Change the Throttle Ratchet
Change the Throttle Tension

Adjust stick tension

Ratcheted Throttle – Smooth Throttle Adjustment
Ratchet
1. Locate the Throttle Strap adjustment screws on both gimbals.
The ratchet set screw engages a serrated section on the gimbal
for a ratcheted throttle, while the tension set screw engages a
strap for smooth tension on the gimbal.
2. To engage the throttle ratchet turn the ratchet set screw clock-
wise until the ratchet engages.
3. To disengage the throttle ratchet turn the screw counter clock-
wise until the gimbal moves freely.
Smooth Tension
1. To engage the throttle tension, turn the Tension set screw clock-
wise until the Tension engages.
2. To disengage the throttle Tension turn the screw counter clock-
wise until the gimbal moves freely.
Adjust Stick Tension
Turn the screws clockwise a small amount using a small Phillips
screwdriver to tighten the stick tension and counter clockwise to
loosen.
NOTICE: Always do a test of stick tension while turning these
screws to ensure stick tension is not too loose or too tight.
Tightening a screw too much can damage a spring. Loosening
a screw too much can let a spring fall off and cause short-
circuit in the transmitter.

Control Stick Length Adjustment

1. Using a 2mm Allen wrench, turn the setscrew in the stick
counterclockwise to loosen it.
2. Make the stick shorter by turning it clockwise or longer
by turn ing it counterclockwise.
3. After adjustment of stick length, tighten the setscrew.
EN
Vertical
Tension
Horizontal Tension
4
Ratchet
Tension
Tension
Ratchet
Horizontal Tension
Vertical
Tension

Advertisement

Table of Contents
loading

Table of Contents