Searching For A Station And Setting Manually; Storing And Retrieving Stations - Porsche CDR-31 2011 Driver Manual

Searching for a station and
setting manually
Setting the frequency manually
1. Select "Frequency".
2. Set the desired frequency using the right knob.
Starting station search
The station search can be used to search for the
station closest to the one currently set in the fre-
quency band.
f Press the
button briefly to search for a sta-
tion above the frequency currently set.
- or -
f Press the
button briefly to search for a sta-
tion below the frequency currently set.
The station search will be activated and will
stop as soon as the CDR-31 has found another
station.
SCAN
The SCAN function searches for all stations in the
frequency band and plays each of these for a
short period.
Starting SCAN
f Press and hold the
or
Stopping SCAN
f Press the
or button briefly.
The last station found will be played.

Storing and retrieving stations

Memory levels and memory locations
The CDR-31 has three memory levels for AM mode
(AM1, AM2 and AM3). Six stations can be stored
on each memory level.
button.
Selecting a memory level
f Press the AM button repeatedly until the de-
sired memory level is selected (AM1, AM2,
AM3).
Storing the station
f Select and hold the desired memory location.
An audible confirmation signal will be heard.
The station will be stored at the selected mem-
ory location and will be played.
23
AM mode