Porsche CDR-31 2011 Driver Manual page 14

Setting the treble
1. Press the SOUND button.
2. Select "Treble".
3. Adjust the desired setting using the
symbols or by turning the right knob.
Setting the balance
The balance settings can be used to adjust the vol-
ume distribution between the left and right speak-
ers.
1. Press the SOUND button.
2. Select "Balance".
3. Adjust the desired setting using the
symbols or by turning the right knob.
Setting the fader*
The fader settings can be used to adjust the vol-
ume distribution between the front and rear speak-
ers.
1. Press the SOUND button.
2. Select "Fader".
3. Adjust the desired setting using the
symbols or by turning the right knob.
*) The fader function is available for specific mod-
els only
12
Basic functions
Setting the Loudness*
The Loudness setting increases the sound capac-
ity by accentuating the low frequencies (bass).
This has the most noticeable effect at lower vol-
and ume levels.
1. Press the SOUND button.
2. Select "Loudness".
Loudness is switched ON
®
Surround (Bose
®
The Centerpoint signal processing system
generates multi-channel surround sound from
standard stereo sources such as CDs, radio and
and MP3s. To achieve this, the stereo signal is contin-
uously analysed and converted into multi-channel
surround sound using Bose's patented algorithm.
®
SurroundStage signal processing, a Bose
technology, sends the surround sound signals
generated in this way to the appropriate speaker,
thus offering the listener a well-balanced 360° lis-
tening experience
1. Press the SOUND button.
2. Select "Surround".
and
Surround is switched ON
®
*) not with BOSE Sound System and Burmester
Audio System
Position (Burmester
Use the "Position" setting to optimise the sound for
the seating position of the listener.
1. Press the SOUND button.
2. Select "Position".
You can choose from the following options:
– "Front"
or OFF .
Sound System)
– "Symmetric"
– "Rear"
3. Select to set the desired option.
or OFF .
®
Audio System only)
The sound is optimised for the driver and pas-
senger.
The sound is optimised for the driver and pas-
sengers both in the front and in the back.
The sound is optimised for the passengers in
the back.