GANN Hydromette BL A plus Operating Instructions Manual page 6

Introduction
surrounding area), static electricity can build up with high voltage,
which can cause strong fluctuations in measured values. The
operator of the measuring instrument can also unintentionally
contribute to the build-up of static charge from his clothing. A
significant improvement can be achieved by ensuring the operator
and the measuring instrument remain completely still during the
measurement process and by earthing (by touching conducting
metal, water or heating pipes, etc.).
Frozen wood cannot be measured. Wood or other materials should
not be measured on conductive surfaces.
The notes and tables in these instructions regarding permitted or
normal humidity conditions in practice and the general definitions of
terms have been taken from the specialist literature. No
responsibility can therefore be taken by the manufacturer for the
correctness of this information. The conclusions to be drawn from
the measurement results are related to the individual conditions
and the knowledge gained from professional experience for each
user.
The measuring instrument and any accessories may only be
properly used as described in these instructions. Keep the device
and accessories out of the reach of children!
Gann Mess- u. Regeltechnik GmbH accepts no liability for damage
resulting from non-compliance with the operating instructions or
from not taking proper care during transport, storage and handling
of the device during operation, even if this duty of care is not
specifically addressed in this operating manual.
6
Hydromette BL A plus