Table of Contents
Advertisement
Basic Functions
Figure 2-2: Display of the capacitive measurement
"Hold" symbol indicates readiness to make a measurement
A measurement process is started by pressing the "M" button. The
"Hold" symbol disappears during the measurement and the values
are updated. After releasing the measurement button, the "Hold"
symbol is displayed again and the last measured values remain
unchanged.
The device is now in Standby mode. Press the measurement
button again to start a new measurement.
Approx. 3 minutes after releasing the measurement button, the
device switches off automatically to save battery power. When the
device is switched on again, the last measured value is shown on
the display.
If the current measured value of the wood moisture is greater than
the stored maximum value, the "Max" symbol flashes on the
display. The maximum value is automatically stored in the memory.
12
Measured value in %
Value of the wood type adjuster
Wood characteristics: Normal (91),
rough
sawn
material thickness / thin (93)
surface
(92)
Hydromette BL A plus
or
low
Advertisement
Table of Contents
