Table of Contents
Advertisement
LIGHTING
Parking lights
The parking lights can be used to help other
road users see the vehicle if it is stopped or
parked. Use the lighting ring on the steering
wheel lever to turn on the parking lights.
Lighting ring in the parking light position.
Turn the lighting ring to the
turn on the parking lights (the license plate
lighting will also illuminate).
Canadian models: If the ignition is in the II
position, the daytime running lights will illumi-
nate instead of the front parking lights. With
the lighting ring in this position, the parking
lights will remain on regardless of what posi-
tion the ignition is in.
US models: When
mode is selected,
the daytime running lights can be deactivated
in the center display. The parking lights will
also be deactivated. In weak daylight or dark
158
conditions, the parking lights and low beams
will be illuminated.
In dark conditions, the rear parking lights also
illuminate when the tailgate is opened to alert
following traffic. This happens regardless of
what position the lighting ring or ignition is in.
Related information
Lighting control and panel (p. 156)
•
Ignition modes (p. 405)
•
position to
Daytime running lights
The vehicle has sensors that detect ambient
lighting conditions. With the lighting ring in
the
position, the daytime running lights
will always be activated when the ignition is
in mode II. In weak daylight or dark condi-
tions, the headlights automatically switch to
low beams.
Lighting ring in AUTO position.
With the steering wheel lever's lighting ring in
the
position, the daytime running lights
(DRL
1
) will illuminate when the vehicle is
driven in daylight conditions. The headlights
will switch automatically from daytime run-
ning lights to low beams in weak daylight or
dark conditions. The headlights will also
switch to low beams if the front fog lights*
and/or rear fog light are activated.
* Option/accessory.
Advertisement
Table of Contents
