Voice Dialing - Sony Ericsson S710 Owner's Manual

Calling
2
If the contact has more than one number, use
and to view the numbers. Select the
phone number to which you want to add the
voice command. Next, record a voice command
such as "John mobile" for the phone number
you selected.
3
Instructions appear. Lift the phone to your ear,
wait for the tone and say the command. The
recorded voice command is played back.
4 If the recording sounds ok
and repeat step 3.
5
To record another voice command for a contact
} New Voice Command
steps 2-4 above.
Caller name
You can choose whether you want to hear the
recorded contact name when you receive a call
from that contact.
To turn the caller name on or off
} Settings }
the General
Caller Name.
This is the Internet version of the user's guide. © Print only for private use.
26
} } No
Yes. If not
again and repeat
} Voice Control } Play
tab

Voice dialing

You can voice dial by saying a prerecorded voice
command. Start voice dialing from standby using
the phone, a portable handsfree, a Bluetooth
headset or by saying your magic word.
To make a call from the phone
From standby, press and hold one of the volume
buttons. Lift the phone to your ear, wait for the tone
and say the name you recorded earlier. The name
is played back and the call is connected.
To make a call with a handsfree
From standby, press the handsfree button, or
Bluetooth headset button.
The magic word
You can record a magic word and use it as a voice
command to allow totally handsfree access to voice
dialing. Instead of pressing and holding a volume
button to voice dial, say the magic word and then
one of your recorded voice commands. The magic
word is especially suitable when using a car
handsfree kit.
Choose a long, unusual word or phrase that can easily
be distinguished from ordinary background speech.