Table of Contents
Advertisement
Getting started
Assembly, SIM card, battery, turning
on, help, calls
Assembly
Before you start using your phone, you
need to insert a new SIM card and the
battery.
SIM card and battery
To insert SIM card and battery
1
Turn off the phone. Remove the battery
cover and battery.
2
With the contacts facing up, slide the
SIM card into the holder until it clicks
into place.
3
Insert the battery with the label side
up, as shown.
4
Slide the battery cover into place.
4
Getting started
This is the Internet version of the User's guide. © Print only for private use.
To remove the SIM card
1
Turn off the phone. Remove the battery
cover and battery.
2
Push the SIM card in to release.
Battery
To charge the battery
Do not connect the charger unless the
battery is inserted.
1
Connect the charger to the phone.
Wait approximately 2.5 hours or until
the battery icon indicates a full charge
before removing the charger.
2
Remove the charger plug by pulling up
and out.
Some functions use more battery
power than others and may require
more frequent recharging. If talk time
or standby time becomes noticeably
≈
2.5 h.
Advertisement
Table of Contents
