Table of Contents
Advertisement
Basic Live Traffic Identifier
3. Operation
Batteries
The FOLTIB identifier is powered by two 1.5-V AA batteries. There is a low-battery
indicator on the panel board. It lights if there is not enough power supplied to the
FOLTIB. If this happens, replace the batteries with new ones. To replace the
batteries, remove the battery plate on the back side of the unit with a Philips
screwdriver.
NOTES:
1. Use 1.5-V alkaline batteries. The low-battery indicator may light if you use
rechargeable batteries.
2. To eliminate the possibility of acid leakage, remove the batteries if the unit will
not be used for a long time.
Page 8
Figure 3-1. Replacing the battery.
724-746-5500 | blackbox.com
Philips
screwdriver
Advertisement
Table of Contents
