Table of Contents
Advertisement
4.1.2 Back and Side
Figure 4-2 shows the back and side of the Basic Live Traffic Identifier. Table 4-2
describes its components.
4.2 Powering on the Unit
Gently insert the tested fiber into the groove at the top of the identifier. Pull the
clamping trigger slowly to press the fiber against the optical assembly. The
identifier powers on when the detector plunger closes and the fiber is in the
correct position. See Figures 4-3 and 4-4.
Chapter 4: Using the Basic Live Traffic Identifier
Figure 4-2. Back and side view.
724-746-5500 | blackbox.com
1 Serial number
2 Clamping trigger
3 Battery plate
Page 11
Advertisement
Table of Contents
