Cable; Gsm Networks - Sony Ericsson P910i User Manual

This is the Internet version of the user's guide. © Print only for private use.
Security
On the tab you can set the Bluetooth security related
Settings
settings of your P910i.
Bluetooth on All Bluetooth wireless technology functionality from
your P910i works. Visibility according to the
setting.
to other devices
Set Bluetooth to
Off
will decrease battery drain. Bluetooth will
automatically switch on if you use
from the applications
Bluetooth
Visible to Selected: All Bluetooth wireless technology
other devices
functionality from your P910i works.
Cleared: All Bluetooth wireless technology
functionality from your P910i works but you cannot
receive beamed items, and other devices cannot
initiate pairing with your P910i.

Cable

Use to set the cable connection mode and the connection
Cable
parameters used when communicating through your P910i's
cable port.
• Set the cable connection mode. Please note that you must set
the mode to when using the P910i as a modem and
Modem
when using the DUN (Dial-up Networking) Wizard.
154 Control panel
Visible
if you do not use Bluetooth, it
Send as >
• Set the baud rate, parity, number of stop bits, character length
and type of flow control required for the connection. When
connecting your P910i via the SyncStation to a USB port on
your PC, use the following (default) settings:
Baud rate 115200
Parity None
Stop bits
1
Character length 8
Flow control CTS/RTS
Tip You can set the cable connection mode when the flip is
closed by selecting
Applications >
Cable.

GSM Networks

This option lets you choose what network to use when you are
outside your operator's area. Choose if you want to search for a
new network or use a preferred one. You can also make a list of
preferred networks.
• – Select between automatic or manual search for
Search mode
a network.
• – Tap the button to get a list of available
Select network
networks.
• – Tap the button to search for available networks.
New search
Connections >