Xiaomi Ninebot Mini Manual page 4

Power Button
Blocking
Bluetooth
Speed Limit
Power Indicator
Power Button
Blocking
Bluetooth
Speed Limit
Power Indicator
Soft pads of steering rack
Power Button
Display panel
Footrest
Air vent
Port for charging
Turn on / off of Mini general power . After turning on segway, if it is not used for 10 minutes, or if the casing of the device is in
the inverted state for more than 5 minutes, the Segway is automatically switched off.
Use a custom application Ninebot (hereinafter referred to as App) to lock. After that, no matter who tried to take the Mini,
Segway will begin to vibrate and audible alarm is activated; at this time, if you are in the range of reach of Buetooth signal,
your smartphone will also start to vibrate, thus warning of the danger
A flashing light of Bluetooth indicates on turned on Bluetooth signal and the lack of connected smartphones; A steady light
indicates a successful connection to your phone.
Light of speed limit indicator indicates that the Mini has a speed limitation. When exceeding the speed, user can clearly feel
the footrest is raised, after which it will be very difficult to speed up. Default Segway has a speed limit of 7km / h, but you can
enter in a custom application APP and remove the speed limit or change the settings.
Whenever segway charge level reaches 20%, the power indicator of device starts blinking, indicating that it must be
recharged. Log in to the user application App to find out the exact charge level of segway and estimate the distance that he
can overcome. When the battery level is below 30%, segways gradually reduces the speed and you may hear an audible
alarm when the battery level is below 10% - Mini limits the speed to 7 km / h.
2. Features
Steering rack
Fender
Running lights
Wheel
Disk (removable)