Operation - ONSIA Sound Art Series Installation Manual & Operating Instructions

OPERATION

1) Charge it. Charger model SMC-3, SMC-7
It's recommended to charge your Bluetooth® Sound Art™ speaker unit completely after unpacking.
Connect the wall charger unit to
an AC outlet and to the DC jack
located on the bottom part of the
Sound Art speaker frame.
red
A LED indicator on the wall
charger indicates the Sound Art
speaker is charging.
Once your speaker is mounted on the wall, you may leave the unit ON. Your speaker will automatically
enter a power saving mode when not in use.
3) Pair it. Play it. Love it!
To pair your Bluetooth® Sound Art™, enable Bluetooth® on your music source device and scan for
Bluetooth® devices (read your device's manual or user's guide to add or setup a Bluetooth® device).
Pair your device with the Bluetooth® device named "BTA-8".
Your Bluetooth® Sound Art™ will give
you many hours
wireless play time
charge. When it's
recharge,it will let you
flashing its LED power
continuously.
of enjoyable
on a single
time to
know by
indicator
green
A LED indicator on
the wall
indicates the
fully charged and can be
unplugged.
Your Bluetooth®
speaker
recharged at the same time.
4 4
charger
speaker is
Sound
can be played
Art™
and