Operation - ONSIA Sound Art Series Installation Manual & Operating Instructions

OPERATION

1) Charge it. Charger model SMC-4
It's recommended to charge your Onsia® Bluetooth® Sound Art™ speaker unit completely after unpacking.
Connect the wall charger unit to
an AC outlet and to
jack located in the back of the
speaker.
A red LED indicator
wall charger indicates
speaker is charging.
2) Power it.
Slide the switch on the back of
your speaker to the "ON" position.
When the speaker is powered
on you will hear a series of tones
indicating the unit is ready to
be paired or play music.
Once your speaker has foot installed, you may leave the unit ON. Your speaker will automatically enter a
power saving mode when not in use.
3) Pair it. Play it. Love it!
To pair your speaker,
Bluetooth® devices (read your device's manual or user's guide to add or setup a Bluetooth®
device). Pair your device with the Bluetooth® device named "OSA119S".
Bluetooth® Sound Art™ models with speakerphone feature only: When paired to a cellphone, or a device
capable of receiving phone calls, you can use the speakerphone feature by selecting the speakerphone
option on your device. If you are streaming music and a phone call is received, you will hear the ring
tone through your Sound Art™ speaker. When the phone call is answered, the music streaming will be
paused. You will then have the option of routing the call through your Sound Art™ speaker by
selecting the speakerphone option on your device. Once the call is terminated, the music streaming
will resume automatically.
Your Bluetooth® Sound
give you many
wireless play time
When it's time to recharge, it
know by flashing its low
continuously.
the DC
on the
the
enable Bluetooth®
Art™ speaker will
hours of enjoyable
on a single charge.
will let you
battery indicator
A green LED
the wall charger indicates the
speaker is fully charged and
can be unplugged.
A blue LED indicator located next
to the DC jack
ON and will remain
indicate the unit is powered.
on your music source
Your
speaker
recharged at the same time.
3
indicator on
will turn
ON to
device and scan
Bluetooth® Sound
can be played
for
Art™
and