ONSIA Sound Art Series Installation Manual & Operating Instructions page 9

NOTE: You ONLY need to connect to one speaker with your Bluetooth® device (example: phone)
The two speakers will automatically connect to each other & play in stereo, using their 'TWS'
enabled circuit. The connect on between the two speakers MUST be made BEFORE the Bluetooth
connect on to the audio source.
Turning Off Onsia ® ' T WS' enabled speakers:
If playing only one 'TWS' speaker:
Press POWER key on the one speakers for approximately three seconds. It will turn OFF.
If using playing two paired 'TWS' speakers:
Press POWER key on one of the speakers for approximately three seconds. Both speakers will turn OFF
at same t me.
*If a single speaker or two paired 'TWS' speakers are powered OFF, then ON again, they will
automat cally connect to last connect on device if the device (phone) is in range. If not, new pairing
and connect ng again will be required.
If you have an Onsia® 'TWS' speaker now and wish to add a second to enable the 'TWS' real stereo
play, its important to disconnect the current, single, 'TWS' speaker from your phone, TURN OFF
Bluetooth® on phone, then begin this process for connectng and playing two 'TWS' speakers. NOTE: Its
important to follow these steps to avoid problems connectng or playing.
9 9