INTRODUCTION Thank you for choosing Bluetooth® Sound Art™ by ONSIA®. These unique flat-panel speakers, concealed in Sound Art™ frames, have reliable, proven components and a proprietary design that will provide a truly enjoyable listening experience. Bluetooth® Sound Art™ speakers have...
OPERATION 1) Charge it. Charger model SMC-4 It’s recommended to charge your Onsia® Bluetooth® Sound Art™ speaker unit completely after unpacking. Connect the wall charger unit to an AC outlet and to the DC jack located in the back of the speaker.
Page 4
INSTALLATION GUIDE Recommended Tool List No tools required. OSA119S can be located on the desktop, table top or other flat surfaces. Package Contents 1 Bluetooth® Sound Art speaker with speakerphone. 1 Wall Charger. 1 Metal Wire Foot 1 User's guide & operating instructions document. Metal Foot lnstallation Slide the metal wire foot into the metal wire holes on the back of the speaker.
Page 5
Use virtually any flat surface to set up your Onsia® Sound Art™ OSA119S Speakerphone enabled Bluetooth® Speaker. However, do not place Sound Art™ in corners, as this tends to create reverberation and sonic reflections and consider a pad under it to absorb vibration in contact with any surface.
ONSIA® through www.onsia.com or calling customer support at: 1-800 279-7686 Possible Cause Symptom Check speaker is powered ON. No sound at all Check volume and mute settings on music source device.
In the event of a defect, Onsia® will, at its option, repair or replace the product with no charge to the purchaser for parts or labor. The repaired or replaced product will be warranted for 90 days from the date of return shipment or for the balance of the original warranty, whichever is longer.
Need help?
Do you have a question about the Sound Art Series and is the answer not in the manual?
Questions and answers