Advertisement
2. BEFORE & AFTER INSTALLATION
After Installation
• Plug the connector in tightly and ensure that the wiring properly works.
• It is advisable to conduct periodic inspection of the panels for damage to front glass, back sheet, frame, junction box,
or external electrical connections.
• Check electrical connections for loose connections and corrosion.
• PV panels can operate effectively without ever being washed, although removal of dirt from the front glass can
increase output.
• W ater, ethanol or a conventional glass cleanser with a micro-iber cloth can be used for regular washing or rinsing of
the front glass to remove dust, dirt or other deposits.
• No aggressive and abrasive cleansers or chemicals such as alkali chemicals including ammonia based solution should
ever be used on the treated front glass.
• Always wear rubber gloves for electrical insulation while maintaining, washing or cleaning panels.
• Deposits of foreign material on the frame surface can be cleaned using a wet sponge or cloth and dried in air or by
using a clean chamois.
• Perform the wiring work by connecting the connector and wires to the stand away from the roof or ground.
6
Hide quick links:
Advertisement
