Gentherm 5220 Operating Manual page 82

28142 Rev 15
See Section 4.1.3 for detailed diagrams of the burner assembly.
Part No.
27902
Standard burner assembly
5375 Venturi assembly
5605 Ceramic burner-screen insulating spacer
5390 Burner screen assembly
27900 Air shutter, profiled
5586
Air screen assembly
See Section 4.2 and 4.3 for detailed information on the 24V Limiter/Converter assembly and
the 12V Limiter assembly, respectively.
Part No.
68215 24-Volt Limiter / Converter assembly
29475 12-Volt Limiter assembly
27907 SI Power Converter Board (FPCI Board)
Spark Ignition Module (Channel Products
63096
Gasliter)
Replacement 24-Volt Surge Protection
57869 Device
57216 Replacement 12-Volt Surge Protection
Device
Gentherm Global Power Technologies
Part Description
Part Description
REPLACEMENT PARTS LIST
Replacement Notes
For replacement of the entire
5220-TEG burner assembly
(Excludes the air screen
assembly)
To be replaced if damage
observed during burner
inspection (Section 10.1)
To be replaced if damage
observed during burner
inspection
To be replaced if damage
observed during burner
inspection
To be replaced if damage
observed during burner
inspection
To be replaced if damage
observed during burner
inspection
(*Not included in 27902 burner)
Replacement Notes
To be replaced if 24V L/C or 12V
Limiter are found to be faulty
(Section 10.3)
To both be replaced if SI system
found faulty (Section 10.2)
SPD's come on all Cathodic
Protection 5220-TEGs and may
need replacing after severe
lightning strikes
Page 76