Performance Log - Gentherm 5220 Operating Manual

28142 Rev 15
Once the TEG has been properly tuned and is producing the correct power for the
present ambient temperature:
a) Move the jumper clip on TB-1 to connect terminals 1 and 2 with caution, as the
terminals are now live (See Figure 13 or Figure 14) .
b) Close the circuit breaker or fuse connecting the TEG to the customer load.
Details for adjusting the L/C, Limiter, and CP interface systems, if applicable,
NOTE:
are in the Adjustment section of this manual.
The TEG is now running, providing continuous electrical power to the load. It is recommended
that a record be kept of the TEG's performance and maintenance history. Each time
adjustments are made, or service is carried out, the details should be recorded. This will
ensure years of reliable, trouble-free operation. If you require assistance from GPT's Customer
Service department, a detailed log will help us diagnose your problem quickly and accurately. A blank
TEG Performance Log is provided at the end of this manual.
NOTE:
Servicing requirements are given in the Maintenance section.
Gentherm Global Power Technologies
Do not allow measured V
determined in the Power Output Evaluation section of this
CAUTION!
manual. This will overheat the thermopile. Overheating
may permanently damage the power unit.
QUICK START PROCEDURE
to exceed the required V
set set
Page 5