Camera Specific Options - Interlogix Advisor Advanced ATS 000A Series Installation And Programming Manual

2.2.2.n.4.7 Exp version
ATS1238.B008
The Expander version screen is an informational screen with the expander
version data.
2.2.2.n.4.8 Jamm detection
8 Jamm detection
>Enable<
The Jamming detection option must be set to Enable if the wireless expander
must detect and report communication jamming attempts.
2.2.2.n.4.11 Default expander
11 Default exp
>No<
Reset the wireless expander to the factory settings.

Camera specific options

2.2.2.n.4.9 Pic options
1>Pic settings
>>>
This menu is specific for systems with wireless PIR camera expanders.
See "Using cameras" on page 203 for more details.
2.2.2.n.4.9.1 Pic settings
1>Burglar set.
>>>
The menu allows you to configure photo recording options separately for the
following camera event types:
•
Burglar alarms
•
Fire alarms
•
Panic alarms
•
Medical alarms
•
Tamper alarms
•
Faults: Device faults and technical alarms
•
Custom type 1: User programmable type 1
•
Custom type 2: User programmable type 2
See also "Camera event types" on page 203.
Advisor Advanced ATSx000A(-IP) Installation and Programming Manual 79