Centronics 101AL Technical Manual page 122

CENTRONICS
SERIES 100 PRINTERS
PREVENTIVE MAINTENANCE PROCEDURES
(December 1974)
The following Preventive Maintenance (PM) procedures apply to
the Series 101 and Series 102 printers.
Frequency of PM : 6 months
Time Required: 1.5 hours (approximately)
Cleaning Material: Medium-bristle cleaning brush,
Twosoft clean cloths,
Liquid Freon
Tools Recommended:
Centronics' Tool Kit No. 63002399-1
Phillips screwdriver
Flat blade screwdriver
Jeweler's eye loupe
Decimal feeler gauges
Oil syringe
Items not available
| through Centronics
Lubricants Recommended:
. Lightweight oil (choice of three)
Teilus No. 27 (Shell) CDCC Spec. No. 30050005
Teresso No. 43 (Esso) CDCC Spec. No. 30050006
Vacualine No. 1405 (Mobil) CDCC Spec. No. 30050007
Grease — CDCC Spec. No. 30050004
Oil — Anderol No. 465, Spec. No. 30050002 (for bushings
and felt washers only)
Reference Manuals: Series 101 and Series 102 Technical Manual
CENTRONAICS
centronics data computercorp.
hudson, n.h. 03051
telephone (603) 883-O0III
eastern region: (617) 646-8545 (mass.)
central region: (513) 294-0070 (ohio)
western region: (714) 979-6650 (calif.)
centronics data computer (canada) Itd.
mississauga, ontario (416) 625-0770
centronics international corp.
brussels, belgium (02) 762-3572
Specifications subject to change without notice. ©1974 Centronics Data Computer Corp.
(PRINTED in U.S.A, 12-74)
6-2 Rev.