Table of Contents
Advertisement
12-2. FUNCTION SELECTION OF REMOTE CONTROLLER
The setting of the following remote controller functions can be changed using the remote controller function selection mode.
Change the setting when needed.
Item 1
1.Change language
Language setting to display
("CHANGE LANGUAGE")
2.Function limit
(1)
("FUNCTION SELECTION")
(2) Use of automatic mode setting ("SELECT AUTO MODE")
(3) Temperature range limit setting ("LIMIT TEMP FUNCTION")
3.Mode selection
(1) Remote controller main/sub setting ("CONTROLLER MAIN/SUB")
("MODE SELECTION")
(4) Contact number setting for error situation ("CALL.")
(1) Temperature display :/°F setting ("TEMP MODE :/°F")
4.Display change
(2) Room air temperature display setting ("ROOM TEMP DISP SELECT")
("DISP MODE SETTING")
(3) Automatic cooling/heating display setting ("AUTO MODE DISP C/H")
[1] Stop the air conditioner to start remote controller function selection mode.
(Details are specified in item3)
[Detailed setting]
CHANGE LANGUAGE setting
The language that appears on the dot display can be selected.
Press the [
MENU] button to change the language.
1
2
5
6
7
1 no1 :
the [
ON/OFF] button.
2 no2 :
3
necessary to press buttons (Press and hold down the [FILTER]
and [
ON/OFF] buttons at the same time for 2 seconds.) on
the normal screen after the above setting is made..
(2) Use of automatic mode setting
1 ON (Initial setting value) : The automatic mode is displayed when
the operation mode is selected.
2 OFF
: The automatic mode is not displayed
when the operation mode is selected.
(3) Temperature range limit setting
1 LIMIT TEMP COOL MODE :
The temperature range can be changed on cooling/dry mode.
2 LIMIT TEMP HEAT MODE :
The temperature range can be changed on heating mode.
3 LIMIT TEMP AUTO MODE :
The temperature range can be changed on automatic mode.
4 OFF (initial setting) : The temperature range limit is not active.
the range cannot be limited when the set temperature range has not changed.
button. The selected setting will flash and the temperature can be set.
Settable range
Cooling/Dry mode : Lower limit:
Upper limit:
Heating mode :
Lower limit:
Upper limit:
Automatic mode :
Lower limit:
Upper limit:
OCH567
Item 2
[5] Setting completed.
[6] Change the display to the normal one. (End)
3
4
8
French (F)
.
67 to
87°F [19 to 30:]
87 to
67°F [30 to 19:]
63 to
83°F [17 to 28:]
83 to
63°F [28 to 17:]
67 to
83°F [19 to 28:]
83 to
67°F [28 to 19:]
operation with automatic mode
[2] Select from item1.
(1) Remote controller main/sub setting
To s
1 Main : The controller will be the main controller.
2 Sub : The controller will be the sub controller.
(2) Use of cloc
To s
1 ON : The cloc
2 OFF : The cloc
(3) Timer function setting
To s
the followings.).
1
2 AUTO OFF TIMER: The auto off timer can be used.
3
SIMPLE TIMER: The simple timer can be used.
4
TIMER MODE OFF: The timer mode cannot be used.
Note: When the use of cloc
used.
(4) Contact number setting for error situation
To s
1 CALL OFF : The set contact numbers are not displayed in case of error.
2 CALL **** *** **** : The set contact numbers are displayed in case
CALL_
: The contact number can be set when the display is as
shown on the left.
Setting the contact numbers
To set the contact numbers ollow the following procedures.
Move the flashing cursor to set numbers. Press the [
(
)] button to move the cursor to the right (left). Press the [
(
) and (
)] button to set the numbers.
Display change setting
(1) Temperature display :/ °F setting
To s
1 : : The temperature unit : is used.
2 °F : The temperature unit °F is used.
(2) Room air temperature display setting
To s
1 ON : The room air temperature is displayed.
2 OFF : The room air temperature is not displayed.
(3) Automatic cooling/heating display setting
[
]
To s
1 ON : One of "Automatic cooling" and "Automatic heating" is displayed
under the automatic mode is running.
2 OFF : Only "Automatic" is displayed under the automatic mode.
Item 3 (Setting content)
: or °F) to display
[3] Select from item2.
ON/OFF] button.
ON/OFF] button.
ON/OFF] button (Choose one of
TIMER" cannot be
ON/OFF] button.
of error.
TEMP. (
ON/OFF] button.
ON/OFF] button.
ON/OFF] button.
) and
Hide quick links:
Advertisement
Table of Contents
