WATANABE WPMZ-3 Series Instruction Manual page 121

1st Layer 2nd Layer
CompareAL1
CompareAL2
CompareAL3
CompareAL4
2. Output
AnalogOutput
BCD Output
ModbusCom
RS-232C Com
DispSelect
LevelDisp
3.Display
TrendDisp
General
4.System
AlarmLog
Initialize
3rd Layer
(setting items)
Initial values
PatternSelect Pattern in use
OutputDispValue None
ActCondition Always
ComparedMode LevelJudge
Excess
OnConditions
InTheZone
10000
0
0
10000
Threshold
0
10000
1.00
OnDelay None
OffDelay None
OutputMode Normal
OutputLogic Negative
OnBgColors Black
PatternSelect Pattern in use
OutputRange 0-10V
OutputDispValue None
0
OutputScale
10000
PatternSelect Pattern in use
OutputDispValue None
DataSignalLogic Negative
SyncSignalLogic Negative
SlaveAddress 1
Baudrate 19200bps
Parity Even
Protocol Modbus-RTU
Baudrate 19200bps
Parity Even
DataLength 7bit
Stopbit 1bit
Delimiter CR LF
PatternSelect Pattern in use
1ch product
MeasureSelect
Ach, Ach + Comp
Level, Trend
LevelSelect
2ch product
Ach + Bch,
TrendSelect
Level, Trend
PatternSelect Pattern in use
Ach Scale
0
Bch Scale
10000
CalcScale
AL Select AL1～AL4:ON
PatternSelect Pattern in use
Ach Scale
0
Bch Scale
10000
CalcScale
AL Select AL1～AL4:ON
TimeAxis 1s/div
Brightness 5 Bright
PowerOnDelay None
PowerSavingTime None
MeasureMode Default
D-ZeroRetention Disable
Language English
DisplayDirection Horizontal
SettingProtect Disable
AdjustProtect Disable
10 sps
DisplayUpdateCycle
PatternCopy ---
SyncedAlarm AL1～4:ON
RecordPos BeforeAndAfter
Overwrite Enable
UserDefaultSave Save current settings as use initial values.
UserDefaultLoad Initialize setting values to user initial values.
Initialize setting values to factoru default.
FactoryDefautLoad
Graphical Digital Panel Meter WPMZ-3 INSTRUCTION MANUAL
4th Layer (setting values)
Settable values
Pattern 1/2/3/4/5/6/7/8
None/Ach/Bch/Calc
Always/ExceptNearZero/OnStable
/ OnStableExceptNearZero/OnHold
LevelJudge/ZoneJudge/DiffJudge
Excess/LessThan
InTheZone/OutsideTheZone
Threshold: ±99999
Hysteresis: 0～99999
ZoneLowerLimit: ±99999
ZoneUpperLimit: ±99999
Hysteresis: 0～99999
ChangeAmount: 0～99999
DetectionInterval: 0.00～99.99[sec]
None/20ms/50ms/100ms/200ms/500ms
1s/5s/10s/20s
Normal/Latch/OneShot5ms/10ms/20ms
/50ms/0.1s/0.2s/0.5s/1s/2s
Positive/Negative
Black/Red/Yellow/Green
Pattern 1/2/3/4/5/6/7/8
0-10V/±10V/1-5V/0-20mA/4-20mA
None/Ach/Bch/Calc
0%: ±99999
100%: ±99999
Pattern 1/2/3/4/5/6/7/8
None/Ach/Bch/Calc
Positive/Negative
Positive/Negative
1～31
9600bps/19200bps/38400bps
None/Even/Odd
ModbusRTU/OriginalCommand/OriginalO
utput
9600bps/19200bps/38400bps
None/Even/Odd
7bit/8bit
1bit/2bit
CR / CR LF
Pattern 1/2/3/4/5/6/7/8
Ach/Bch/Calc/Ach+Comp/Bch+Comp
/Calc+Comp/Ach+Bch/Calc+A+B
Ach/Bch/Calc/Ach+Bch
Pattern 1/2/3/4/5/6/7/8
LowerLimit: ±99999
UpperLimit: ±99999
AL1/AL2/AL3/AL4
Pattern 1/2/3/4/5/6/7/8
LowerLimit: ±99999
UpperLimit: ±99999
AL1/AL2/AL3/AL4
100ms/div,1s/div,2s/div,5s/div,10s/div,
30s/div,60s/div120s/div
5Bright/4/3/2/1Dark/0 Off
None/2sec/5sec/10sec/20sec/30sec/60sec
None/1min/2min/5min/10min/30min/60mi
n
Default/Multi/WaveCompare
Disable/Enable
日本語/English
Horizontal/Vertical
Disable/Enable
Disable/Enable
10 sps/ 1 sps
Go to screen of pattern copy.
AL1/AL2/AL3/AL4
BeforeAlarm/BeforeAndAfter/AfterAlarm
Disable/Enable
120
Remarks
Select pattern No. to set.
Select a condition of comparion.
Only LevelJudge.
Only ZoneJudge.
Only LevelJudge.
Only ZoneJudge.
Compare ON/OFF after ActCondition is
kept certain time set here.
Select an output mode.
Select an output logic.
Select a background color
alarming.
Select pattern No. to set.
Select a type of output range.
Select a ch referenced for analog output.
Scaling of analog output.
Set 0% and 100% value.
Select pattern No. to set.
Select a ch referenced for BCD output.
Select an output mode.
Select an output mode.
Set ID of the product.
Select a baudrate.
Select a type of parity bit.
Select a protocol.
Select a baudrate.
Select a type of parity bit.
Enable when Protocol is
OriginalCommand or OriginalOutput.
Select pattern No. to set.
*Bch and Calc is enable in 2ch product.
*Bch and Calc is enable in 2ch product.
Select pattern No. to set.
Set scale of level screen.
Select pattern No. to set.
Set scale of level screen.
Set time scale of division time.
Off means that whole of secreen is
turned off.
Set time that until measure after power
on.
Display is dark while power saving.
Whether remember D-Zero value or not.
Language.
Select a direction of screen.
Copy settings of pattern to other pattern.
IM-0883-01
when